Concrete Drilling Without vibration, without damaging, block removal operations can be done with concrete cutting machines in the desired area, with the desired shape, size and diameter of the iron reinforcement. Cutting machines have been developed to be used in horizontal and vertical positions and can meet all kinds of needs. Concrete Drilling, Elevator and stairwell openings, Joint cuts to prevent floor concrete cracks, In cutting and opening of doors, windows, channels, retaining walls, Channel openings according to needs. used in operations such as
Istanbul Core Concrete Cutting
Concrete Cutting The machines have been developed to be used in horizontal and vertical positions and can meet all kinds of needs. Core drilling and concrete cutting are applied for multi-purpose openings such as doors, ventilation and evacuation. Between 10-73cm depth, horizontal and vertical reinforced concrete structures can be cut smoothly. It is often preferred in curtain cuts, door and window ventilation duct openings.
İstanbul Karot Chemical Anchor
chemical anchor It is a method that takes a short time to apply. It differs from other concrete cutting and drilling methods in many aspects. It is obtained by mixing binary chemical substances in order to strengthen old structures. This makes it easy to apply in the area where the project is being carried out. It appears that if done correctly, the structure can double the standing time. A hole is made according to the sprout size of the place where the concrete will be applied. Chemical anchor mixture is poured into this hole, and then the iron ore is placed in the hole. The margin of error in these processes is very low. Calculations must be made accurately and completely, as concrete and chemicals freeze rapidly after planting. Chemical anchoring, which is also frequently used in column reinforcements, is made of extremely strong mixtures. This method, which is suitable for use in many areas, is an alternative method used in construction areas. When applied by experts, very good results are obtained.
istanbul Core Hydraulic Cutting
asphalt cut, curtain cutting, air conditioning and similar holes, drilling and cutting of elevator shafts, opening of natural gas installation, cutting and opening of water installation holes, drilling and opening ventilation pipes, correcting the excess and roughness in the interior and exterior of the buildings without any problems, removing the incorrectly placed columns and walls and cutting, building demolition operations, concrete drilling and concrete cutting operations.
İstanbul Core Rope Cutting
rope cutting machine works integrated with a rail. Rope concrete cutting is a type of coring and concrete cutting service. Wire-rope cutting applications, which are widely used, help to cut concrete properly. It also allows operation without the need to apply a lot of force. With the rope concrete cutting technique, which allows working even under water, cutting stubbornly hard concrete surfaces is very comfortable. Rope is actually a name given to the cutting blade. Here, the feature of the knife is that it consists of wires and has a diamond tip. In addition, concrete rope cutting applications are very reliable. It operates on a rail, that is, a wheeled and skidded system. Before the application, the area, structure or concrete piece to be cut must be accurately measured and adjusted. Afterwards, a rope cutting system is created in accordance with the area to be cut. Concrete cutting applications with wire are very advantageous in terms of being able to make millimetric cuts without the possibility of injury.
Istanbul Core Cutting
Asphalt Displacement Services It may be necessary to cut and remove concrete or asphalt that wears out over time. With this method, changes can be made to the ground. For this, asphalt can be removed by cutting without damaging the periphery of the horizontal asphalt with the joint cutting technique.
Joint Cutting Process
For cutting concrete floors and asphalt joint cutting method is used. There are three different types of this machine: electric, diesel and gasoline. Since there is no need for electricity in diesel and gasoline machines, they are used in almost every region.